D-Link DNS-340L User Manual - Page 82
Disk Management, Hard Drive Configuration, Management, Enable, Disable, Manual Rebuild
View all D-Link DNS-340L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Section 4 - Configuration Disk Management Hard Drive Configuration To setup the Hard Drive RAID configuration of your ShareCenter, click the Management tab and then the Disk Management icon. Select the Hard Drive Configuration menu item on the left of the window. This menu will allow you to set the RAID type and format your hard drives. Hard Drive Your ShareCenter hard drives can be configured here Configuration: and formatted in various RAID configurations. Current Raid Type: If the drives are already formatted the RAID configuration will be displayed here. Set RAID type and Click this button to launch a wizard that allows you to Reformat: select the RAID configuration and format the drives. Auto-Rebuild If you have chosen RAID 1 as the configuration option, Configuration: you can Enable or Disable the Auto-Rebuild function here using the radio buttons. Enable Auto-Rebuild: Enabling Auto-Rebuild will rebuild a failed RAID 1 drive when a new drive has replaced the failed one. Disable Auto-Rebuild: If you do not want to automatically rebuild drives after a failure when using the RAID 1 functionality then you can check this option. Note: You can still rebuild a drive using the RAID 1 functionality however you must initiate the rebuild manually. Manually Rebuild Now: If Auto-Rebuild is disabled then you can use the Manual Rebuild option by clicking this button. D-Link ShareCenter DNS-340L User Manual 80