D-Link DNS-340L User Manual - Page 348

Section 4 - Configuration COMPONENT Motion Detection DESCRIPTION Record Mode Manual Record - requires you to manually When using the Record by Schedule mode together with the Motion Detection function, you must first click the Go to Web link and log in to the camera's web interface and enable the motion detection function on that camera. Please refer to the manual of your camera for more information on enabling motion detection. Copy Quota Settings Automatic Overwrite Quota Keep the File within Estimate Required Space Event Record: Prerecord Event Record: Post Record Record Mode Record Mode Copy the camera recording setup to other similar cameras Configurable per camera. Indicates the maximum amount of disk space will be used for recordings. Click this checkbox if you wish to overwrite the earliest recorded video with the latest video if reaches the quota limitation or disk space is full. Click this checkbox to set the amount of storage you want to allocate to each camera. Next to it the remaining free disk space is displayed This indicates how long you want to keep the recorded camera video files before it is overwritten. Click this button to find out how much disk space is required for video storage with the current settings. If required, select how long video should be recorded for, prior to an event alarm being triggered (1-180 seconds). If required, select how long video should be recorded for following an event alarm being triggered (1-180 seconds). No Record - no recording is made. Record by Schedule - Drag and drop on the weekly map below • Always Record means that the camera will always record for the specified period. • Motion Detection Record will wait for motion on the camera to be detected before it begins recording. • Event Record will wait for an event on the camera to be triggered before it begins recording D-Link ShareCenter DNS-340L User Manual 346