D-Link DNS-340L User Manual - Page 52
RAID 10, RAID Configuration, elect RAID Type
View all D-Link DNS-340L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Section 3 - Installation RAID 10 Under RAID Configuration, Select RAID Type, choose RAID 10. Read the RAID 5 configuration requirements. Click Next to continue. With RAID 10, the drives are mirrored for redundancy and use disk striping to help optimize reading from storage. Map Drive to Network indicates that the NAS has separated the drive into a RAID array. Use the drop-down menus to select drive letters to map the drives to. For further information, refer to "Mapping a Drive" on page 59. Note: If the size of these two drives are different, the excess space on the larger drives will be formatted as a JBOD Volume. Click Next to continue. D-Link ShareCenter DNS-340L User Manual 50
50
D-Link ShareCenter DNS-340L User Manual
Section 3 - Installation
Under
RAID Configuration
, S
elect RAID Type
, choose
RAID 10
. Read the
RAID 5
configuration requirements.
Click
Next
to continue.
With RAID 10, the drives are mirrored for redundancy and use disk striping
to help optimize reading from storage. Map Drive to Network indicates that
the NAS has separated the drive into a RAID array. Use the drop-down menus
to select drive letters to map the drives to. For further information, refer to
“Mapping a Drive” on page 59.
Note:
If the size of these two drives are different, the excess space on the
larger drives will be formatted as a
JBOD
Volume.
Click
Next
to continue.
RAID 10