D-Link DSM-622H Product Manual - Page 11

Using the Configuration Utility The DSM-622H/624H is a true plug and play device. The DSM-622H/624H will be instantly accessible to network computers with UPnP™ compatible operating systems. However, if you wish to use the advanced configuration features that include assigning folder and access rights; or if you want to use the DSM-622H/624H attached directly to one computer, you can configure it. The computer that you use for initial configuration must be directly connected to the DSM-622H/624H with an Ethernet cable. For Windows OS users: „ Start your Web browser program. „ If you do not have a DHCP server in your network: Type the IP address of the DSM-622H/624H in the address field and press Enter. Make sure that the IP addresses of the DSM-622H/624H and your computer are in the same subnet. The default IP address of the DSM-622H/624H is 192.168.0.65. „ If you do have a DHCP server in your network: Type http://dsm-622h into the address field and press Enter. „ The screen below will appear. For Macintosh OS users: „ In Safari, go to Bookmarks > Show all bookmarks „ Click on Rendezvouz. „ Double-click on DSM-622H/624H. „ The login screen will appear. Enter the user name: admin and leave the password field blank. Once you've logged in, you can set a password in the Web-based configuration interface. Click OK Once you have logged in, the Home screen, shown on the next page, will appear. *Although your device may have a different product number than the one on these screens, these images apply to all of the DSM-600 series of products, including the DSM-622H and DSM-624H. 11