D-Link DSM-622H Product Manual - Page 39

Networking Basics, continued, Assigning a Static IP, Address, Windows XP/2000

Get D-Link DSM-622H - Wireless Central Home Drive Network PDF manuals and user guides
UPC - 790069263521
View all D-Link DSM-622H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000 „ Click on Internet Protocol (TCP/IP). „ Click Properties. „ In the Internet Protocol (TCP/IP) Properties window (shown below), select Use the following IP address. Input your IP address and subnet mask. (The IP addresses on your network must be within the same range. For example, if one computer has an IP address of 192.168.0.2, the other computers should have IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network). IP Address: e.g., 192.168.0.2 Subnet Mask: 255.255.255.0 Default Gateway:Enter the LAN IP address of the router. Note: D-Link routers have a default LAN IP address of 192.168.0.1. „ Select Use the following DNS server addresses. Enter the LAN IP address of the router. (D-Link routers have a LAN IP address of 192.168.0.1). „ Click OK. You have completed the assignment of a static IP address. (You do not need to assign a static IP address if you have a DHCP capable gateway/router). 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
39
Networking Basics
(continued)
Assigning a Static IP
Address
in
Windows XP/2000
You have completed the assignment of a
static IP address. (You do not need to assign
a static IP address if you have a DHCP
capable gateway/router).
Click on
Internet Protocol
(TCP/IP)
.
Click
Properties
.
In the Internet Protocol (TCP/IP)
Properties window (shown below),
select
Use the following IP
address
. Input your
IP address
and subnet mask.
(The IP
addresses on your network must
be within the same range. For
example, if one computer has an
IP address of 192.168.0.2, the
other computers should have IP
addresses that are sequential, like
192.168.0.3 and 192.168.0.4. The
subnet mask must be the same
for all the computers on the
network).
IP Address:
e.g., 192.168.0.2
Subnet Mask:
255.255.255.0
Default Gateway:
Enter the LAN
IP address of the router.
Note: D-Link routers have a default
LAN IP address of 192.168.0.1.
Select
Use the following DNS
server addresses
. Enter the LAN
IP address of the router. (D-Link
routers have a LAN IP address of
192.168.0.1).
Click
OK
.