D-Link DWL-7200AP Product Manual - Page 39

Using the AP Manager (continued) Device Configuration>General (continued) • Load Balance: This pulldown selection enables or disables load balancing. When you enable load balance you allow several access points to balance wireless network traffic and wireless clients among the access points with the same SSID. All the APs that share Load Balancing must have the same SSID. Assign each access point a different non-overlapping channel (e.g., 1, 6, 11). • User Limit: Enter the number of load balancing users, from 0-64. • Link Integrity: This pulldown selection enables or disables Link Integrity. When LinkIntegrity is enabled, the wireless segment associated with the AP will be disconnected whenever the connection between the AP and the LAN is dropped. • Telnet Support: This pulldown selection enables or disables the ability to Telnet into the selected device(s). • Telnet Timeout: This pulldown selection defines the timeout period during a Telnet session with the selected device(s). 39