D-Link DWS-1008 Product Manual - Page 92

Adding a Telnet User To log in with Telnet, a user must supply a valid username and password. To add a username and password to the local database, use the following command: set user username password password Optionally, you also can configure MSS either to locally authenticate the user or to use a RADIUS server to authenticate the user. Use the following command: set authentication admin {user-glob} method1 [method2] [method3] [method4] You can use the same username and password for SSH or create a new one. Displaying Telnet Status To display the status of the Telnet server, use the following command: show ip telnet To display the Telnet server status and the TCP port number on which a switch listens for Telnet traffic, type the following command: DWS-1008> show ip telnet Server Status Port Enabled 23 Changing the Telnet Service Port Number To change the TCP port the switch listens on for Telnet connections, use the following command: set ip telnet port-num Caution: If you change the Telnet port number from a Telnet session, MSS immediately ends the session. To open a new management session, you must Telnet to the switch with the new Telnet port number. Resetting the Telnet Service Port Number to Its Default To reset the Telnet management service to its default TCP port, use the following command: clear ip telnet D-Link DWS-1008 User Manual 73