Dacor EO230 Installation Instructions - Page 10
Cabinet Cutout Continued
View all Dacor EO230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Planning the Installation Cabinet Cutout (Continued) Support Platform warning The top surface of the support platform must be installed flush with the cutout in the front of the cabinet or wall and any trim. Failure to install the platform properly may cause the exhaust vent to deform and/or become obstructed. An obstructed exhaust area may cause the oven to malfunction. See below. Provide a platform within the cabinet to support the oven. A properly supported piece of 3/4" (1.9 cm) thick plywood is recommended. All contact surfaces between the appliance and the cabinet, including the support platform, must be sturdy, straight and level. The oven cannot be leveled after it has been installed. Oven door Cool air intake (do not block) Exhaust deflector (do not bend) Support platform Deformed sheet metal blocking vent RIGHT Exhaust vent (do not block) Sheet metal on bottom of oven Cabinet front or wall WRONG Support Platform Configuration 8