Dacor EO230 Installation Instructions - Page 8

Planning the Installation Selecting the Location • Carefully check the location where the oven is to be installed. The oven should be placed for convenient access, but away from drafts that may be caused by doors, windows, and heating, ventilation and air conditioning outlets. • Make certain that electrical power can be provided in the selected location. Be certain that proper clearance is provided for the oven door when it is in the open position. Cabinet Cutout • Plan the installation so that all minimum clearances are met or exceeded. Cutout dimensions shown provide minimum clearances, unless otherwise noted. • The specified minimum cabinet depth and width must be provided. The cabinet depth and width must completely enclose the recessed portion of the oven. • Cabinet cutout dimensions must be used as indicated. Model Number A B C EO127 MOH127 MOV127 EO130 MOH130 MOV130 27" 7/16" (69.7 cm) 25 ½" 27" 56 ½" (64.8 cm) (68.6 cm) (143.5 cm) 28 ½" 30" 62 ½" (72.4 cm) (76.2 cm) (158.8 cm) EO227 MOH227 25 ½" 27" (64.8 cm) (68.6 cm) MOV227 50 9/16" EO230 (128.4 cm) NA MOH230 28 ½" 30" (72.4 cm) (76.2 cm) MOV230 Cutout tolerances: +1/16 (1.6 mm), -0, unless otherwise stated. C C Recommended electrical location Recommended electrical location 1" (2.5 cm) min. clear to bottom of door Single Wall Oven Cutout A B Alternate 3/4" (1.9 cm) support platform electrical location 1" (2.5 cm) min. clear to bottom of door A B Double Wall Oven Cutout 1 ¾" (4.5 cm) min. clear to top of door for heat exhaust 1 ¾" (4.5 cm) min. 31 1/4" (79.4 cm) recommended (may be altered) clear to top of door for heat exhaust 3/4" (1.9 cm) support platform 4" typical toe kick (shown) 4" typical toe kick (shown) 9 5/8" (24.4 cm) recommended (may be altered) 6