Dell Alienware Area-51 Threadripper Edition R3 Alienware Area-51 Threadripper - Page 164
System setup options
View all Dell Alienware Area-51 Threadripper Edition R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
2 During POST, when the DELL logo is displayed, watch for the F2 prompt to appear, and then press F2 immediately. NOTE: The F2 prompt indicates that the keyboard is initialized. This prompt can appear very quickly, so you must watch for it, and then press F2. If you press F2 before the F2 prompt, this keystroke is lost. If you wait too long and the operating system logo appears, continue to wait until you see the desktop. Then, turn off your computer and try again. System setup options NOTE: Depending on your computer and its installed devices, the items listed in this section may or may not appear. Table 3. System setup options-Main menu Main BIOS Information BIOS Version Displays the BIOS version number. Build Date Displays the BIOS release date. Product Information Product Name Displays the product name. Default: Alienware Area-51 R6. Set Service Tag Allows you to enter the service tag of your computer. Asset Tag Displays the asset tag of your computer. EC Information EC Firmware Version Displays the Embedded Controller firmware version. Memory Information Total Memory Displays the total computer memory installed. Memory Available Displays the amount of memory available on the computer. 164