Dell Alienware Area-51 Threadripper Edition R3 Alienware Area-51 Threadripper - Page 44
Replacing the hard drive, Procedure, Post-requisites
View all Dell Alienware Area-51 Threadripper Edition R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Replacing the hard drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Hard drives are fragile. Exercise care when handling the hard drive. Procedure 1 Align the screw holes on the hard-drive bracket with the screw holes on the hard drive (HDD1). 2 Replace the four screws (#6-32x3.6) that secure the hard drive to the harddrive bracket. 3 Place the hard-drive assembly (HDD1) in the chassis. 4 Replace the screw (#6-32x6) that secures the hard-drive assembly (HDD1) to the chassis. 5 Connect the power cable and data cable to the hard drive (HDD1). NOTE: Repeat step 2 to step 5 to replace any other hard drives (HDD2 and HDD3) installed in your computer. Post-requisites 1 Replace the left and right side-panels. See "Replacing the side panels". 2 Replace the stability foot. 44