Dell Alienware Area-51 Threadripper Edition R3 Alienware Area-51 Threadripper - Page 69
Replacing the graphics card, Procedure, Post-requisites
View all Dell Alienware Area-51 Threadripper Edition R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Replacing the graphics card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the graphics card with the PCI-Express card connector on the system board. 2 Place the card in the connector and press down firmly. Ensure that the card is firmly seated. 3 Press and hold the securing tab on the clamp. 4 Push the clamp back towards the bracket. 5 Rotate the PCIE door to close. 6 Connect the power cables to the graphics card. NOTE: The location of the power supply connector (VGA1, VGA2, and VGA3) varies depending on the video card installed. Post-requisites 1 Replace the left and right side-panels. See "Replacing the side panels". 2 Replace the stability foot. 69