Dell Alienware Area-51 Threadripper Edition R3 Alienware Area-51 Threadripper - Page 172
Clearing CMOS Settings, NOTE: The computer must be disconnected from the electrical outlet
View all Dell Alienware Area-51 Threadripper Edition R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Clearing CMOS Settings WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: The computer must be disconnected from the electrical outlet to clear the CMOS setting. 1 Lay the system on the right side. 2 Remove the stability foot. 3 Remove the left and right side-panels. See "Removing the side panels". 4 Locate the CMOS jumper (CMOS_CLR) on the system board. See "systemboard components". 5 Remove the jumper plug from pins 2 and 3. 6 Fix it on pins 1 and 2. 7 Wait for approximately five seconds to clear the CMOS setting. 172