Dell DR6300 DR Series System Command Line Reference Guide - Page 90
system --datacheck --enable, system --datacheck --disable
View all Dell DR6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Result Please enter administrator password: Please enter administrator's new password: Please re-enter administrator's new password: Changed administrator's password. system --telnet [--enable | --disable] Description Displays the current telnet access status, or you can use the command options to enable or disable telnet access for a DR Series system. Syntax system --telnet Result Telnet State : Disabled NOTE: In this example, the system --telnet command output showed the telnet access status as disabled. The following example shows the command for enabling telnet access on your DR Series system. To disable telnet access, use the system --telnet --disable command. system --telnet --enable Successfully enabled telnet. system --datacheck --enable Enables one or both Data Check scan options that can be used on a DR Series system. The enable option can be set to all, namespace, or blockmap. You can individually enable namespace or blockmap scan options, or both options using the all scan option (which means that both the namespace and blockmap scan types will be enabled). Description Enables an individual Data Check scan option type (or both scan types) when used in a DR Series system CLI command. Syntax system --datacheck [--enable ] Result Data Check configuration successful: namespace and blockmap scans currently enabled. NOTE: This example shows all Data Check scan options enabled. To enable only the namespace or only the blockmap scan, use those options respectively in the DR Series system CLI command, for example, --enable -namespace, or --enable --blockmap. system --datacheck --disable Disables one or both Data Check scan option types that can be used on a DR Series system. You can individually disable namespace or blockmap scan options, or both options using the all scan option (which means that both the namespace and blockmap scan types will be disabled). Description Disables an individual Data Check scan option type (or both scan types) when used in a DR Series system CLI command. 90