Dell DR6300 DR Series System Command Line Reference Guide - Page 91
system --datacheck --throttle
View all Dell DR6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Syntax system --datacheck [--disable ] Result Data Check configuration successful: all scans currently disabled. NOTE: This example shows all Data Check scan options being disabled. To disable only the namespace or the blockmap scan, use those options respectively in the DR Series system CLI command, for example, --disable -namespace, or --disable --blockmap. system --datacheck --throttle Use the Data Check --throttle option to specify the percentage of available DR Series system resources you want to use when running Data Check scans when the other system operations (data ingest, Replication, and Cleaner processes) are idle. The range is between 1 to 100 percent (%), and the default is 50%. Description Enables Data Check scans to use any percentage (1-100) of available DR Series system resource that you define. In this example, 75% of the available DR Series system resources are selected. Syntax system --datacheck [--throttle ] Result Data Check configuration successful: throttle set to 75%. system --marker [--enable] [--disable] Description Enables or disables the marker detection status for all of the supported backup software used with a DR Series system based on the option you use with the command. Syntax system --marker Result Please enter either --enable or --disable to change system-level marker settings. For more information about enabling or disable marker detection settings on a DR Series system, see system --marker [-enable] or system --marker [--disable]. NOTE: To display the current status of the marker detection settings, use the DR Series system CLI command: system --show --marker. system --show --marker Marker Detection : Enabled system --marker [--disable] Description Disables the marker detection status for all supported backup software on a DR Series system. For example, the DR Series system supports specific versions of data management application (DMA) software like NetBackup version 6.5 91