Dell DR6300 DR Series System Command Line Reference Guide - Page 94

NOTE: The above options are only available on a Physical DR. Syntax system --storage --unblink --type external --service_tag CTKHVW3 Result Turned off blinking for all disks in enclosure "CTKHVW3". system --storage [--extend] Description This command is used to extend your storage space on a DR4300e system. If you purchased your DR4300e system with one 4.5TB license, and later require additional capacity, you can extend the usable capacity in your base DR Series system. You run this command after you have purchased and added a 4.5TB capacity license. For example, you would run the system --license --add command to add a new expansion license. (You can then run the system -license --show --verbose command to view and confirm that the new storage expansion license is added/ enabled.) Syntax system --storage --extend Result # system --storage --extend WARNING: IO to the box will be stopped during this operation. Do you want to continue (yes/no) [n]? yes Please enter the root password: Stopping filesystem... Done. Expanding data storage volume... Done. Starting filesystem... Done. Data storage expanded successfully. system --mgmt_traffic Description The command configures Webserver or Telnet to use a specific network interface. Syntax system --mgmt_traffic [--add] [--type ] [--interface ] [--update] [--type ] [--interface ] [--delete] [--type ] --add --update --delete Add access network configuration. Update access network configuration. Delete access network configuration. 94