Dell Dimension 2300 Dell Dimension 2300 Owner's Manual - Page 71
Adding Cards
View all Dell Dimension 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Adding Cards CAUTION: Before you begin any of the procedures in this section, follow the safety instructions on page 7. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the computer cover. The computer's card connectors allow you to install different types of devices, such as modems and network adapters. 1 Shut down the computer (see page 27). NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack. 2 Turn off any attached devices and disconnect them from their electrical outlets.Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board. 3 Remove the computer cover (see page 67). 4 Lay the computer on its side so that the system board is on the bottom of the inside of the computer. 5 Unscrew and remove the filler bracket for the card slot you want to use. filler bracket Adding Pa rts 71