Dell Dimension 2300 Dell Dimension 2300 Owner's Manual - Page 81
If you insert the module correctly, the securing clips snap into
View all Dell Dimension 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
memory module connectors securing clips (2) notches (2) memory module crossbars (2) connector cutouts (2) step 7 step 8 step 9 8 Align the notches on the bottom of the module with the crossbars in the connector. NOTICE: To avoid breaking the memory module, do not press near the middle of the module. 9 Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the connector. Press firmly on the ends of the module until it snaps into place. If you insert the module correctly, the securing clips snap into the cutouts at each end of the module. 10 Replace the computer cover (see page 82). NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 11 Connect your computer and devices to electrical outlets, and turn them on. Adding Pa rts 81