Dell Force10 E600i E600 TeraScale Installation Guide - Page 24
Remove the AC Power Supply, Power Cord, Thumb Screw, Cord Retainer
View all Dell Force10 E600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
www.dell.com | support.dell.com Step Task 5 Plug the AC power cord into an AC outlet. 6 Toggle the power supply switch to the ON position, and verify that Status LED lights green. Remove the AC Power Supply CAUTION: This unit has more than one power supply connection; all connections must be removed to remove all power from the unit. ATTENTION: Cette unité est équipée de plusieurs raccordements d'alimentation. Pour supprimer tout courant électrique de l'unité, tous les cordons d'alimentation doivent être débranchés. WARNUNG: Diese Einheit verfügt über mehr als einen Stromanschluß; um Strom gänzlich von der Einheit fernzuhalten, müssen alle Stromzufuhren abgetrennt sein. To remove an AC power supply unit: Step Task 1 Determine if the system is operating in power supply redundancy. If the system is operating with non-redundant power, removing a power supply powers down the system. 2 Toggle the power switch on the on the unit to the OFF position. 3 Unplug the power cord from the AC Power Supply and the AC power outlet. a Loosen the power cord retainer thumb screw. b Rotate the retainer clockwise away from the socket and unplug the power cord from the socket. Figure 6-4. Removing the AC Power Cord Thumb Screw Cord Retainer Power Cord 4 Loosen the locking screws. 5 Slide the power supply out of the slot. 6 If you are not replacing the power supply, place a power supply blank in the empty slot. 24 | Power Supply