Dell Force10 S2410-01-10GE-24P SFTOS Command Reference - Page 141

Command History Version 2.5.1 Version 2.3 Modified: Added ranges for ports and port channels. Added Interface Range Vlan Config mode. Introduced Usage Information The untagged command includes the functionality of these commands: participation include, pvid, and acceptframe untagged. For details, see the VLAN chapter in the SFTOS Configuration Guide. Related Commands show vlan show port tagged Displays information about VLANs, either detailed information for a specific VLAN or summary information for all configured VLANs. Displays port information for a selected port or for all ports Sets tagging to enabled for a specified interface in the selected VLAN. vlan Command History Version 2.3 Modified: Replaced by interface vlan. vlan acceptframe This command sets the frame acceptance mode per interface. Mode Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#. Command History Version 2.5.1 Version 2.3 Removed from CLI Deprecated Related Commands untagged Sets tagging to disabled for a specific port (or range of ports) in the selected VLAN. vlan association mac This command configures a VLAN based on a set of MAC addresses, source and destination. Note: The S50V and S25P support MAC-based VLANs. The original S50 does not. The no version of this command removes the association of the VLAN with the specified MAC address. Syntax [no] vlan association mac mac For mac, enter a source MAC address to be used as the basis for the VLAN. VLAN Commands | 141