Dell Inspiron 14 - N4050 User Manual - Page 13

Display Bezel

Get Dell Inspiron 14 - N4050 PDF manuals and user guides View all Dell Inspiron 14 - N4050 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

1 display assembly 2 screws (2) Replacing the Display Assembly 1. Follow the instructions in Before You Begin. 2. Place the display assembly in position and replace the two screws that secure the display assembly to the computer base. 3. Route the display cable and Mini-Card antenna cables through the routing guides. 4. Connect the display cable to the connector on the system board. 5. Connect the Mini-Card antenna cables to the Mini-Card. 6. Replace the hinge cover. See Replacing the Hinge Cover. 7. Replace the USB board. See "Replacing the USB Board" on page 48. 8. Replace the optical drive. See Replacing the Optical Drive. 9. Follow the instructions from step 3 to step 7 in Replacing the Palm-Rest Assembly. 10. Replace the battery. See Replacing the Battery. CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Display Bezel Removing the Display Bezel 1. Follow the instructions in Before You Begin. 2. Remove the display assembly. See Removing the Display Assembly. CAUTION: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the display bezel. 3. Using your fingertips, carefully pry up the inside edge of the display bezel. 4. Remove the display bezel.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
Replacing the Display Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Place the display assembly in position and replace the two screws that secure the display assembly to the computer base.
3.
Route the display cable and Mini-Card antenna cables through the routing guides.
4.
Connect the display cable to the connector on the system board.
5.
Connect the Mini-Card antenna cables to the Mini-Card.
6.
Replace the hinge cover. See
Replacing the Hinge Cover
.
7.
Replace the USB board. See
"Replacing the USB Board" on page 48
.
8.
Replace the optical drive. See
Replacing the Optical Drive
.
9.
Follow the instructions from
step 3
to
step 7
in
Replacing the Palm
-
Rest Assembly
.
10.
Replace the battery. See
Replacing the Battery
.
Display Bezel
Removing the Display Bezel
1.
Follow the instructions in
Before You Begin
.
2.
Remove the display assembly. See
Removing the Display Assembly
.
3.
Using your fingertips, carefully pry up the inside edge of the display bezel.
4.
Remove the display bezel.
1
display assembly
2
screws (2)
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
CAUTION:
The display bezel is extremely fragile. Be careful when removing it to prevent damaging the display bezel.