Dell Inspiron 14 - N4050 User Manual - Page 9
Replace the USB board. See
View all Dell Inspiron 14 - N4050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1. Follow the instructions in Before You Begin. 2. Connect the camera cable to the connector on the camera module. 3. Use the alignment posts on the display cover to place the camera module in position and snap the camera module into place. 4. Replace the display bezel. See Replacing the Display Bezel. 5. Replace the display assembly. See Replacing the Display Assembly. 6. Replace the hinge cover. See Replacing the Hinge Cover. 7. Replace the USB board. See "Replacing the USB Board" on page 48. 8. Replace the optical drive. See Replacing the Optical Drive. 9. Follow the instructions from step 3 to step 7 in Replacing the Palm-Rest Assembly. 10. Replace the battery. See Replacing the Battery. CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Back to Contents Page