Dell Inspiron 14 - N4050 User Manual - Page 32
Replacing the Palm-Rest Assembly
View all Dell Inspiron 14 - N4050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
1 power-button board cable 2 touch-pad cable CAUTION: Carefully separate the palm rest from the computer base to avoid damage to the palm rest. 7. Using a plastic scribe, carefully pry out the palm-rest assembly and then ease the palm-rest assembly from the computer base 8. Lift the palm-rest assembly off the computer base. 1 palm-rest assembly 2 plastic scribe 9. Remove the power button board. See Removing the Power Button Board. Replacing the Palm-Rest Assembly 1. Follow the instructions in Before You Begin. 2. Replace the power button board. See Replacing the Power Button Board. 3. Align the palm-rest assembly on the computer base and gently snap the palm-rest assembly into place. 4. Slide the touch-pad cable and power-button board cable into the connectors on the system board and press down on the connector latches to secure them. 5. Replace the three screws on the palm-rest assembly. 6. Replace the keyboard. See Replacing the Keyboard. 7. Replace the eight screws that secure the palm-rest assembly to the computer base. 8. Replace the battery. See Replacing the Battery.