Dell Inspiron 15 5566 Inspiron 15 5000 Service Manual - Page 65
Replacing the heat-sink assembly, Procedure, Post-requisites
View all Dell Inspiron 15 5566 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Replacing the heat-sink assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can damage the system board and processor. NOTE: If either the system board or the fan and heat-sink assembly is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved. Procedure 1 Place the heat-sink assembly on the system board. 2 Align the screw holes on the heat-sink assembly with the screw holes on the system board. 3 In sequential order (indicated on the heat-sink assembly), tighten the three captive screws (M2x3) that secure the heat-sink assembly to the system board. 4 Connect the fan cable to the system board. Post-requisites 1 Follow the procedure from step 3 to step 8 in "Replacing the computer base". 2 Replace the keyboard. 3 Replace the wireless card. 4 Replace the hard drive. 5 Replace the base cover. 6 Replace the optical drive. 7 Replace the battery. 65