Dell Inspiron 15 5566 Inspiron 15 5000 Service Manual - Page 80

Replacing the display assembly, Procedure, Post-requisites

Get Dell Inspiron 15 5566 PDF manuals and user guides View all Dell Inspiron 15 5566 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

Replacing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Place the palm-rest assembly at the edge of the table with the coin-cell battery facing away from the edge. 2 Align the screw holes on the display hinges with the screw holes on the palmrest assembly. 3 Replace the screws that secure the display hinges to the palm-rest assembly. 4 Close the display and turn the computer over. 5 Route the display cable through the routing guides on the palm-rest assembly. 6 Slide the display cable to the connector and press down on the latch to connect the display cable to the system board. 7 Route the antenna cable through the routing guides on the palm-rest assembly. Post-requisites 1 Follow the procedure from step 3 to step 8 in "Replacing the computer base". 2 Replace the keyboard. 3 Replace the wireless card. 4 Replace the hard drive. 5 Replace the base cover. 6 Replace the optical drive. 7 Replace the battery. 80

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
Replacing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
Procedure
1
Place the palm-rest assembly at the edge of the table with the coin-cell battery
facing away from the edge.
2
Align the screw holes on the display hinges with the screw holes on the palm-
rest assembly.
3
Replace the screws that secure the display hinges to the palm-rest assembly.
4
Close the display and turn the computer over.
5
Route the display cable through the routing guides on the palm-rest assembly.
6
Slide the display cable to the connector and press down on the latch to connect
the display cable to the system board.
7
Route the antenna cable through the routing guides on the palm-rest assembly.
Post-requisites
1
Follow the procedure from step 3 to step 8 in ”
Replacing the computer base
".
2
Replace the
keyboard
.
3
Replace the
wireless card
.
4
Replace the
hard drive
.
5
Replace the
base cover
.
6
Replace the
optical drive
.
7
Replace the
battery
.
80