Dell Inspiron 15 5566 Inspiron 15 5000 Service Manual - Page 75

Replacing the system board, Procedure

Get Dell Inspiron 15 5566 PDF manuals and user guides View all Dell Inspiron 15 5566 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Replacing the system board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the appropriate changes again after you replace the system board. Procedure 1 Connect the power-adapter port cable to the system board. 2 Slide the I/O-board cable into the connector and press down on the latch to secure the cable to the system board. 3 Turn the system board over. 4 Slide the ports on the system board into the slots on the palm-rest assembly and place the system board on the palm-rest assembly. 5 Align the screw hole on the system board with the screw hole on the palm-rest assembly. 6 Replace the screw (M2x3) that secures the system board to the palm-rest assembly. 7 Slide the display cable into the connector and press down on the latch to secure the cable to the system board. 8 Turn the computer over and open the display. 9 Slide the touchpad cable into the connector and press down on the latch to secure the cable. 10 Connect the power-button board cable to the system board. 75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
Replacing the system board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
NOTE: Your computer’s Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTE: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the appropriate
changes again after you replace the system board.
Procedure
1
Connect the power-adapter port cable to the system board.
2
Slide the I/O-board cable into the connector and press down on the latch to
secure the cable to the system board.
3
Turn the system board over.
4
Slide the ports on the system board into the slots on the palm-rest assembly and
place the system board on the palm-rest assembly.
5
Align the screw hole on the system board with the screw hole on the palm-rest
assembly.
6
Replace the screw (M2x3) that secures the system board to the palm-rest
assembly.
7
Slide the display cable into the connector and press down on the latch to secure
the cable to the system board.
8
Turn the computer over and open the display.
9
Slide the touchpad cable into the connector and press down on the latch to
secure the cable.
10
Connect the power-button board cable to the system board.
75