Dell Inspiron 15 5566 Inspiron 15 5000 Service Manual - Page 91

Removing the display cable, Prerequisites, Procedure

Page 91 highlights

Removing the display cable WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. CAUTION: These removal instructions are only applicable for versions of this product with a non-touch screen display. Prerequisites 1 Remove the battery. 2 Remove the optical drive. 3 Remove the base cover. 4 Remove the hard drive. 5 Remove the wireless card. 6 Remove the keyboard. 7 Follow the procedure from step 1 to step 7 in "Removing the computer base". 8 Remove the display assembly. 9 Remove the display bezel. 10 Remove the display panel. 11 Remove the display hinges. Procedure 1 Disconnect the camera cable from the connector on the camera module. 2 Peel off the tape that secures the camera cable to the display back-cover. 3 Note the camera cable routing and remove the camera cable from the display back-cover. 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110

Removing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
CAUTION: These removal instructions are only applicable for versions of
this product with a non-touch screen display.
Prerequisites
1
Remove the
battery
.
2
Remove the
optical drive
.
3
Remove the
base cover
.
4
Remove the
hard drive
.
5
Remove the
wireless card
.
6
Remove the
keyboard
.
7
Follow the procedure from step 1 to step 7 in ”
Removing the computer base
".
8
Remove the
display assembly
.
9
Remove the
display bezel
.
10
Remove the
display panel
.
11
Remove the
display hinges
.
Procedure
1
Disconnect the camera cable from the connector on the camera module.
2
Peel
off
the tape that secures the camera cable to the display back-cover.
3
Note the camera cable routing and remove the camera cable from the display
back-cover.
91