Dell Inspiron 300m Service Manual - Page 38

Speakers

Get Dell Inspiron 300m PDF manuals and user guides View all Dell Inspiron 300m manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Back to Contents Page Speakers Dell™ Inspiron™ 300m Service Manual Removing the Speakers CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Owner's Manual. NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read "Before You Begin" before performing the following procedure. 1. Remove the battery. 2. Remove the keyboard. 3. Remove the palm rest. 4. Remove the M2 x 4-mm screw that secures the speaker to the bottom case. NOTE: The left and right speakers are interchangeable. 1 system board connector (1 per speaker) 2 speaker connector (1 per speaker) 3 M2 x 4-mm screw (1 per speaker) 4 speaker cable (1 per speaker) 5 speakers (2) NOTICE: Do not pull on the speaker cable. Pull from the speaker connector to disconnect the cable. 5. Disconnect the speaker cable from the system board connector. NOTICE: Handle the speakers with care to avoid damaging them. 6. Remove the speaker by pulling it straight up and out of the bottom case.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
Back to Contents Page
Speakers
Dell™ Inspiron™ 300m Service Manual
Removing the Speakers
1.
Remove the
battery
.
2.
Remove the
keyboard
.
3.
Remove the
palm rest
.
4.
Remove the M2 x 4-mm screw that secures the speaker to the bottom case.
5.
Disconnect the speaker cable from the system board connector.
6.
Remove the speaker by pulling it straight up and out of the bottom case.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Owner's Manual
.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read "
Before You Begin
" before performing the following procedure.
NOTE:
The left and right speakers are interchangeable.
1
system board connector
(1 per speaker)
2
speaker connector
(1 per speaker)
3
M2 x 4-mm screw
(1 per speaker)
4
speaker cable
(1 per speaker)
5
speakers (2)
NOTICE:
Do not pull on the speaker cable. Pull from the speaker connector to disconnect the cable.
NOTICE:
Handle the speakers with care to avoid damaging them.