Dell Inspiron 300m Service Manual - Page 47
captive screw 2
View all Dell Inspiron 300m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
1 captive screw (2) 2 cover 8. If a modem is not already installed, go to step 10. 9. If you are replacing a modem, remove the existing modem: a. Remove the screw securing the modem to the system board, and set it aside. b. Pull straight up on the attached pull-tab to lift the modem out of its connector on the system board, and disconnect the modem cable. 1 modem cable connector 2 modem 3 modem screw 4 system board connector 10. Connect the modem cable to the modem. NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card. 11. Align the modem with the screw hole and press the modem into the connector on the system board. 12. Install the screw to secure the modem to the system board. 13. Replace the cover.