Dell Latitude E6320 Owners Manual - Page 41

Installing The Keyboard, battery, keyboard trim, After Working Inside Your Computer - keyboard replacement

Get Dell Latitude E6320 PDF manuals and user guides View all Dell Latitude E6320 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

9. Remove the tape securing the keyboard cable from the keyboard. 10. Disconnect and remove the keyboard cable from the keyboard. Installing The Keyboard 1. Connect the keyboard cable and secure it to the keyboard using the tape. 2. Connect the keyboard cable to its connector on the system board. 3. Turn the keyboard over and lay it on the palmrest. 4. Replace and tighten the screws to secure the keyboard to the palmrest assembly. 5. Replace and tighten the screws to secure the keyboard to the computer. 6. Install the battery. 7. Install the keyboard trim 8. Follow the procedures in After Working Inside Your Computer. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
9.
Remove the tape securing the keyboard cable from the keyboard.
10.
Disconnect and remove the keyboard cable from the keyboard.
Installing The Keyboard
1.
Connect the keyboard cable and secure it to the keyboard using the tape.
2.
Connect the keyboard cable to its connector on the system board.
3.
Turn the keyboard over and lay it on the palmrest.
4.
Replace and tighten the screws to secure the keyboard to the palmrest
assembly.
5.
Replace and tighten the screws to secure the keyboard to the computer.
6.
Install the
battery
.
7.
Install the
keyboard trim
8.
Follow the procedures in
After Working Inside Your Computer
.
41