Dell Latitude X300 Service Manual - Page 26
Adding a Mini PCI Card
View all Dell Latitude X300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Memory, Modem, and Mini PCI Card Modules: Dell Latitude X300 Service Manual 13. Replace the cover. Adding a Mini PCI Card If you ordered a Mini PCI card with your computer, the card is already installed. CAUTION: Before performing any of the procedures listed below, read and follow the safety instructions in the System Information Guide. 1. Ensure that the work surface is flat and clean to prevent scratching the computer cover. 2. Save and close any open files, exit any open programs, and shut down the computer. 3. If the computer is connected to a media base (docked), undock it. See the documentation that came with the media base for instructions. 4. Disconnect the computer from the electrical outlet. 5. Wait 10 to 20 seconds and then disconnect any attached devices. 6. Remove any installed PC Card or blanks, battery, and devices. NOTICE: Handle modules and cards by their edges, and avoid touching pins and contacts. Ground yourself by touching a metal connector on the back of the computer. Continue to ground yourself periodically during this procedure. 7. Turn the computer over, and loosen both the captive screw(s) from the Mini PCI card cover and remove the cover. file:///F|/Service%20Manuals/Dell/Latitude/x300/upgrades.htm (9 of 14) [2/28/2004 8:26:29 AM]