Dell Latitude X300 Service Manual - Page 48
Display Assembly, Removing the Display Assembly
View all Dell Latitude X300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Hinge Covers and Display Assembly: Dell Latitude X300 Service Manual 3. Press down on the top of each hinge cover to snap the hinge covers into place. 4. Close the display. 5. Press the back of each hinge cover into the back of the computer. NOTE: The back of each hinge cover has a tab that snaps into a slot on the back of the computer. Display Assembly Removing the Display Assembly CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide. NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read "Before You Begin" before performing the following procedure. 1. Remove the battery. 2. Remove the keyboard. 3. Turn the computer over, and remove the two M3 x 5-mm screws from the bottom of the computer. file:///F|/Service%20Manuals/Dell/Latitude/x300/display.htm (3 of 7) [2/28/2004 8:26:33 AM]