Dell OptiPlex 7060 Small Form Factor Service Manual - Page 47
Installing the heat sink fan, Align the heat sink fan onto the heat sink [1].
View all Dell OptiPlex 7060 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
a. Disconnect the heat sink fan cable from the connector on the system board [1]. b. Remove the 3 screws that secure the heat sink fan to the heat sink [2]. c. Lift the heat sink fan away from the system [3]. Installing the heat sink fan 1. Align the heat sink fan onto the heat sink [1]. 2. Replace the 3 screws to secure the heat sink fan to the heat sink [2]. 3. Connect the heat sink fan cable to the connector on the system board [3]. Disassembly and reassembly 47
a.
Disconnect the heat sink fan cable from the connector on the system board [1].
b.
Remove the 3 screws that secure the heat sink fan to the heat sink [2].
c.
Lift the heat sink fan away from the system [3].
Installing the heat sink fan
1.
Align the heat sink fan onto the heat sink [1].
2.
Replace the 3 screws to secure the heat sink fan to the heat sink [2].
3.
Connect the heat sink fan cable to the connector on the system board [3].
Disassembly and reassembly
47