Dell OptiPlex 7060 Small Form Factor Service Manual - Page 67
Intrusion switch [1], Disconnect the following cables from the connectors on the system board
View all Dell OptiPlex 7060 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
3. To remove the I/O panel: a. Remove the screw that secures the I/O panel [1]. b. Rotate the I/O panel and remove it from the system [2]. c. Disconnect the hard drive data cable [3], optical drive data cable [4] and power cable [5] from the connectors on the system board. 4. Disconnect the following cables from the connectors on the system board: a. Intrusion switch [1] b. CPU power [2] c. Power switch [3] 5. Unroute the PSU cables from the retention clips [4]. Disassembly and reassembly 67
3.
To remove the I/O panel:
a.
Remove the screw that secures the I/O panel [1].
b.
Rotate the I/O panel and remove it from the system [2].
c.
Disconnect the hard drive data cable [3], optical drive data cable [4] and power cable [5] from the connectors on the
system board.
4.
Disconnect the following cables from the connectors on the system board:
a.
Intrusion switch [1]
b.
CPU power [2]
c.
Power switch [3]
5.
Unroute the PSU cables from the retention clips [4].
Disassembly and reassembly
67