Dell OptiPlex 7060 Small Form Factor Service Manual - Page 61
Remove the 3 screws that secure the PSU to the system [1]., To remove the PSU
View all Dell OptiPlex 7060 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3. To release the PSU: a. Disconnect the CPU power cable from the system board [1]. b. Unroute the power cables from the retention clips on the chassis [2]. 4. To remove the PSU: a. Remove the 3 screws that secure the PSU to the system [1]. b. Disconnect the system power cable from the connector on the system board [2]. c. Lift the cables away from the system [3]. d. Press the blue release tab [4] at the rear end of the PSU unit, slide the PSU and lift it away from the system [5]. Disassembly and reassembly 61
3.
To release the PSU:
a.
Disconnect the CPU power cable from the system board [1].
b.
Unroute the power cables from the retention clips on the chassis [2].
4.
To remove the PSU:
a.
Remove the 3 screws that secure the PSU to the system [1].
b.
Disconnect the system power cable from the connector on the system board [2].
c.
Lift the cables away from the system [3].
d.
Press the blue release tab [4] at the rear end of the PSU unit, slide the PSU and lift it away from the system [5].
Disassembly and reassembly
61