Dell OptiPlex 7060 Small Form Factor Service Manual - Page 52
Intrusion switch, Removing intrusion switch
View all Dell OptiPlex 7060 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
4. Install the: a. Heat sink fan b. Hard drive and optical drive module c. HDD assembly d. Front bezel e. Side cover 5. Follow the procedure in After working inside your computer. Intrusion switch Removing intrusion switch 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. Front bezel c. HDD assembly d. Hard drive and optical drive module e. Heat sink fan f. Heat sink 3. To remove the intrusion switch: a. Disconnect the intrusion switch cable from the connector on the system board [1]. b. Slide the intrusion switch and lift it away from the system [2]. 52 Disassembly and reassembly
4.
Install the:
a.
Heat sink fan
b.
Hard drive and optical drive module
c.
HDD assembly
d.
Front bezel
e.
Side cover
5.
Follow the procedure in
After working inside your computer
.
Intrusion switch
Removing intrusion switch
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
Side cover
b.
Front bezel
c.
HDD assembly
d.
Hard drive and optical drive module
e.
Heat sink fan
f.
Heat sink
3.
To remove the intrusion switch:
a.
Disconnect the intrusion switch cable from the connector on the system board [1].
b.
Slide the intrusion switch and lift it away from the system [2].
52
Disassembly and reassembly