Dell OptiPlex 7060 Small Form Factor Service Manual - Page 59
Installing the M.2 PCIe SSD, To remove the M.2 PCIe SSD
View all Dell OptiPlex 7060 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
3. To remove the M.2 PCIe SSD: a. Remove the single (M2x3.5) screw that secures the M.2 PCIe SSD to the system board [1]. b. Lift and pull out the PCIe SSD from its connector on the system board [2]. c. Remove the SSD thermal pad [3]. Installing the M.2 PCIe SSD NOTE: The instructions are applicable to M.2 SATA SSD also. 1. Place the SSD thermal pad into the slot on the system board [1] . 2. Insert the M.2 PCIe SSD to the connector on the system board [2]. 3. Replace the single (M2x3.5) screw that secures the M.2 PCIe SSD to the system board [3]. Disassembly and reassembly 59
3.
To remove the M.2 PCIe SSD:
a.
Remove the single (M2x3.5) screw that secures the M.2 PCIe SSD to the system board [1].
b.
Lift and pull out the PCIe SSD from its connector on the system board [2].
c.
Remove the SSD thermal pad [3].
Installing the M.2 PCIe SSD
NOTE:
The instructions are applicable to M.2 SATA SSD also.
1.
Place the SSD thermal pad into the slot on the system board [1] .
2.
Insert the M.2 PCIe SSD to the connector on the system board [2].
3.
Replace the single (M2x3.5) screw that secures the M.2 PCIe SSD to the system board [3].
Disassembly and reassembly
59