Dell PowerStore 5200T EMC PowerStore Host Configuration Guide - Page 19
SAN - Recommended Configuration, Single Appliance Cluster
View all Dell PowerStore 5200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
1. PowerStore appliance 2. Node 3. Fibre Channel Switch 4. Host SAN - Recommended Configuration Consider the following recommendations when setting up a SAN infrastructure. Single Appliance Cluster NOTE: Be sure to configure proper zoning for FC and NVMe/FC or proper subnetting with iSCSI and NVMe/TCP. ● It is recommended that a host is connected with two paths to each node for redundancy. ● The following diagram describes simple connectivity with a single PowerStore appliance. Best Practices for Storage Connectivity 19
1. PowerStore appliance
2. Node
3. Fibre Channel Switch
4. Host
SAN - Recommended Configuration
Consider the following recommendations when setting up a SAN infrastructure.
Single Appliance Cluster
NOTE:
Be sure to configure proper zoning for FC and NVMe/FC or proper subnetting with iSCSI and NVMe/TCP.
●
It is recommended that a host is connected with two paths to each node for redundancy.
●
The following diagram describes simple connectivity with a single PowerStore appliance.
Best Practices for Storage Connectivity
19