Dell PowerStore 5200T EMC PowerStore Host Configuration Guide - Page 20
Two Appliance Cluster, Three Appliance Cluster
View all Dell PowerStore 5200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1. PowerStore appliance 2. Node 3. ToR/iSCSI Switch 4. Host Two Appliance Cluster NOTE: Be sure to configure proper zoning for FC and NVMe/FC or proper subnetting with iSCSI and NVMe/TCP. ● It is recommended that a host is connected with two paths to each node for redundancy. ● The following diagram describes simple connectivity with two (2) PowerStore appliances. 1. PowerStore appliance 2. Node 3. ToR/iSCSI Switch 4. Host Three Appliance Cluster NOTE: Be sure to configure proper zoning for FC and NVMe/FC or proper subnetting with iSCSI and NVMe/TCP. ● It is recommended that a host is connected with two paths to each node on each appliance for redundancy. ● The following diagram describes simple connectivity with three (3) PowerStore appliances. 20 Best Practices for Storage Connectivity