Dell PowerStore 5200T EMC PowerStore Host Configuration Guide - Page 77
Boot from SAN, Fibre Channel Configuration
View all Dell PowerStore 5200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Validation Config File Impact set zfs:zfs_log_unmap_ignore_si ze=256 Enable Solaris MPxIO multipathing: mpxio-disable="no"; fp.conf Stability Fibre Channel path failover tuning: fp_offline_ticker = 20; fp.conf Fibre Channel path failover tuning: fcp_offline_delay = 20; fp.conf Maximum I/O size for ssd driver for Solaris 10, 11-11.3 (SPARC) ssd.conf ssd_max_xfer_size=0x100000; Stability Stability Stability Maximum I/O size for sd driver for Solaris 11.4 (SPARC) 11.x (x86) sd_max_xfer_size=0x100000; sd.conf Stability Soaris ssd driver tuning for Solaris 10, 11-11.3 (SPARC) ssd-config-list = "DellEMC PowerStore","throttlemax:64, physical-blocksize:4096, disksort:false, cache-nonvolatile:true"; ssd.conf Stability Soaris sd driver tuning for Solaris 11.4 (SPARC) 11.x (x86) sd-config-list = "DellEMC PowerStore","throttlemax:64, physical-blocksize:4096, disksort:false, cache-nonvolatile:true"; sd.conf Stability Solaris MPxIO multi-path driver tuning scsi_vhci.conf load-balance="round-robin"; auto-failback="enable"; Stability Solaris MPxIO multi-path driver tuning scsi_vhci.conf scsi-vhci-update-pathstateon-reset = "DellEMC PowerStore", "yes"; Stability Severity Refer to Section Recommended Recommended Recommended Mandatory Updating fp.conf configuration file Updating fp.conf configuration file Updating fp.conf configuration file Updating ssd.conf configuration file Mandatory Updating sd.conf configuration file Recommended Updating ssd.conf configuration file Recommended Updating sd.conf configuration file Mandatory Mandatory Updating scsi_vhci.conf configuration file Updating scsi_vhci.conf configuration file Boot from SAN For guidelines and recommendations for boot from SAN with Solaris hosts and PowerStore, refer to the Considerations for Boot from SAN with PowerStore appendix. Fibre Channel Configuration This section describes the recommended configuration to apply when attaching a host to thePowerStore cluster using host Fibre Channel HBAs. Host Configuration for Solaris 77