Dell PowerStore 5200T EMC PowerStore Host Configuration Guide - Page 23
Host Configuration for VMware vSphere ESXi, Related E-Lab Host Connectivity Guide, Scope,
View all Dell PowerStore 5200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3 Host Configuration for VMware vSphere ESXi This chapter contains the following topics: Topics: • Related E-Lab Host Connectivity Guide • Chapter Scope • Recommended Configuration Values Summary • Boot from SAN • Fibre Channel (FC) Configuration • NVMe over Fibre Channel Configuration • iSCSI Configuration • NVMe/TCP Configuration • vStorage API for System Integration (VAAI) Settings • Setting the Maximum I/O • Confirming UNMAP Priority • Configuring VMware vSphere with PowerStore Storage in a Multiple Cluster Configuration • Multipathing Software Configuration • PowerStore Considerations • vSphere Considerations Related E-Lab Host Connectivity Guide The topics in this chapter detail specific caveats and configuration parameters that must be present when configuring a VMware vSphere ESXi host to access a PowerStore storage. These caveats and parameters should be applied with the configuration steps that are detailed on the E-Lab Host Connectivity Guide for VMware vSphere ESXi (see the E-Lab Interoperability Navigator at https://elabnavigator.dell.com). Chapter Scope This chapter provides guidelines only for configuring ESXi hosts that are connected externally to PowerStore. For configuring an internal ESXi host on PowerStoreX, see the Dell EMC PowerStore Virtualization infrastrucure Guide document at https:// dell.com/support. NOTE: This document includes links to external documents. These links may change. If you cannot open a link, contact the vendor for information. Recommended Configuration Values Summary The following table summarizes all used and recommended variables and their values when configuring hosts for VMware vSphere. NOTE: Unless indicated otherwise, use the default parameters values. Validation To clarify the above note for using default parameter settings unless stated otherwise in this chapter, Impact Stability & Performance Severity Recommended Refer to Section For further details, see the operating system and HBA documentation. Host Configuration for VMware vSphere ESXi 23