Dell Studio One 19 1909 Studio One 19 Service Manual - Page 12
Replacing the Support Assembly
View all Dell Studio One 19 1909 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
1 touch pad cable 3 touch panel cable 2 LVDS cable 4 LCD panel Replacing the Support Assembly 1. Follow the instructions in Before You Begin. 2. Reconnect the following cables to the LCD panel: l LVDS cable from LVDS connector l touch pad cable from the touch pad connector l touch panel cable from the touch panel module 3. Replace the fourteen screws that secure the support assembly to the LCD panel. 4. Replace the hard drive (see Replacing the Hard Drive). 5. Replace the power supply unit (see Replacing the Power Supply Unit). 6. Replace the optical drive (see Replacing the Optical Drive). 7. Replace the inverter (see Replacing the Inverter). 8. Replace the side I/O panel (see Replacing the Side I/O Panel). 9. Replace the system board (see Replacing the System Board). Back to Contents Page