Dell Studio One 19 1909 Studio One 19 Service Manual - Page 26

Microphone

Page 26 highlights

Back to Contents Page Microphone Dell Studio One 19/1909 Service Manual Removing the Microphone Replacing the Microphone WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. Removing the Microphone 1. Follow the procedures in Before You Begin. 2. Remove the computer cover (see Removing the Computer Cover). 3. Remove the shield (see Removing the Shield). 4. Remove the two screws that secure the microphone to the support assembly. 5. Disconnect the cable from the microphone. 6. Lift the microphone away from the support assembly. 1 microphone 3 microphone cable 2 screws (2) Replacing the Microphone 1. Follow the procedures in Before You Begin. 2. Reconnect the cable to the microphone. 3. Replace the two screws that secure the microphone to the system assembly. 4. Replace the shield (see Replacing the Shield). 5. Replace the computer cover (see Replacing the Computer Cover). 6. Connect your computer and all attached devices to electrical outlets, and turn them on. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

Back to Contents Page
Microphone
Dell Studio One 19/1909 Service Manual
Removing the Microphone
Replacing the Microphone
Removing the Microphone
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Remove the shield (see
Removing the Shield
).
4.
Remove the two screws that secure the microphone to the support assembly.
5.
Disconnect the cable from the microphone.
6.
Lift the microphone away from the support assembly.
Replacing the Microphone
1.
Follow the procedures in
Before You Begin
.
2.
Reconnect the cable to the microphone.
3.
Replace the two screws that secure the microphone to the system assembly.
4.
Replace the shield (see
Replacing the Shield
).
5.
Replace the computer cover (see
Replacing the Computer Cover
).
6.
Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1
microphone
2
screws (2)
3
microphone cable