Denon AVR 2805 Owners Manual - Page 24
Check of the measurement results - subwoofer setup
UPC - 081757506076
View all Denon AVR 2805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Check of the measurement results 1 Select the items. The measurement results of each item can be checked here. (Remote control unit) *Auto Setup Sp Config.Check 2 Press the ENTER button and display the verification screen. NOTE: • When measurements have been made using the measurement microphone, speakers with a built- in filter such as subwoofers might be set with a value that differs from the physical distance (Remote control unit) because of the internal electrical delay. [Speaker Config. Check] [Delay Time Check] [Channel Level Check] 3 If the check ends, press the ENTER button again. (Remote control unit) 4 Select from the following three items based on the measurement results. • Set with the checked measurement value. • Perform the measurement again. • Cancel the checked measurement value. (Remote control unit) *Auto Setup Store 5 When the "Store" is selected, all parameters are stored up . When the "Retry" is selected, it measures again. (Remote control unit) 24