Denon AVR 2805 Owners Manual - Page 77

DSP surround simulation • To operate the surround mode and surround parameters from the remote control unit. 1 Select the surround mode for each input channel. (Remote control unit) The surround mode switches in the following order each time the DSP SIMULATION button is pressed: WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB VIRTUAL MATRIX VIDEO GAME MONO MOVIE CLASSIC CONCERT 2 Press the surround patameter button. Display the surround parameter screen. The screen for the selected surround mode appears. (Remote control unit) *Surr Parameter ROOM: Medium 3 Set the parameters. 1 2, 4 3 4 (Remote control unit) 4 When the surround parameters are set using the buttons on the main unit, stop operating buttons after completing the settings. The settings are automatically finalized and the normal display reappears after several seconds. When the settings are made using the buttons on the remote control unit, press the "ENTER" or "SURROUND PARAMETER" button to finish. NOTES: • The surround speaker setting can also be changed with the SPEAKER button on the remote control unit. • When "Default" is selected and the cursor left button is pressed, "CINEMA EQ." and "D.COMP." are automatically turned off, "ROOM SIZE" is set to "medium", "EFFECT LEVEL" to "10", "DELAY TIME" to "30ms" and "LFE" to "0dB". • The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual size of the listening room. • When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC II, DOLBY PRO LOGIC IIx, DTS NEO:6 modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS surround. 77