Denon AVR 2808CI Owners Manual - English - Page 32

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Front Select front speaker size. [Selectable items] Large Small : S elect front speaker size. Subwoofer Select subwoofer use. [Selectable items] Yes No : S elect subwoofer use. Subwoofer Mode Select low range signal to be reproduced by subwoofer. [Selectable items] LFE LFE+Main : S elect subwoofer signal. Crossover Select crossover frequency from which subwoofer handles low range signal. [Selectable items] 40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz 200Hz 250Hz : Select crossover frequency. Distance FL Set distance from listening position to front left speaker. [Variable range] 0.0ft ~ 60.0ft Distance FR Set distance from listening position to front right speaker. [Variable range] 0.0ft ~ 60.0ft d Dolby Digital Setup Set dynamic range for downmix playback of Dolby Digital sources. [Selectable items] ON : Compression is used. Select this if sound from front speakers is distorted. OFF : Do not use compression. This is the recommended setting. • Set this to "ON" if the sound from the front speakers seems distorted. • When not using the center speaker or surround speakers, the playback sound is down-mixed and output from the front speakers. f Auto Surround Mode Make setting for memorizing surround mode setting for each input signal type. [Selectable items] ON : Memorize settings. Most recently stored surround mode is automatically selected. OFF : Do not memorize settings. Surround mode does not change according to input signal. • The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below. q Analog and PCM 2-channel signals w Dolby Digital and DTS 2-channel signals e Dolby Digital and DTS multi-channel signals r Multi-channel signals other than Dolby Digital and DTS (PCM, DSD, etc.) • When playing in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed. g Manual EQ Adjust tonal quality for each speaker using graphic equalizer. Base Curve Copy Copy the Room EQ´s "Audyssey Flat" correction curve. [Selectable items] Yes No "Base Curve Copy" is displayed after the auto setup procedure has been performed. Adjust CH Select speaker adjustment method. [Selectable items] Each CH : A djust tonal quality for each speaker separately. L/R CH : A djust tonal quality for each L/R speaker pair. ALL CH : A djust tonal quality for all speakers together. Manual EQ Select the speaker and frequency band and adjust the level. [Selectable items] 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz 16kHz [Variable range] -20dB ~ 0dB ~ +6dB Default Resets the settings to the default values. 29