Denon AVR 2808CI Owners Manual - English - Page 43
Tone Control, Room EQ
UPC - 081757507660
View all Denon AVR 2808CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting SB CH OUT (for 2-channel sources) Determine whether to use surround back speakers. [Selectable items] ON : The surround back channel signal is played. OFF : The surround back channel signal is not played. This operation can be performed directly pressing the SURROUND BACK button on the main unit. s Tone Control Adjust the tonal quality of the sound. Tone Defeat Turn tone adjustments off. [Selectable items] ON : Playback without tone adjustment. OFF : Allow tone adjustment (treble, bass). SW ATT (Subwoofer Attenuate) Attenuate subwoofer level when using EXT. IN mode. [Selectable items] ON : The input from the subwoofer channel is attenuated. OFF : The input from the subwoofer channel is not attenuated. Usually use in this mode. Set this to "ON" if the subwoofer channel level seems too high when playing Super Audio CD. Subwoofer Turn subwoofer output on and off. [Selectable items] ON : The subwoofer is used. OFF : The subwoofer is not used. The tone cannot be adjusted when in the DIRECT mode. Bass Adjust low frequency range (bass). [Variable range] -6dB ~ +6dB Treble Adjust high frequency range (treble). [Variable range] -6dB ~ +6dB "Bass" and "Treble" can be set when "Tone Defeat" is set to "OFF". Default Resets the settings to the default values. d Room EQ Select room equalizer for current environment. [Selectable items] Audyssey : Optimize frequency response of all speakers. Audyssey Byp. L/R : Optimize frequency response of speakers except front L and R speakers. Audyssey Flat : Optimize frequency response of all speakers to flat response. Manual : Apply frequency response set with "Manual EQ" (vpage 29). OFF : Turn equalizer off. Operating from the main unit or main remote control unit Press the ROOM EQ button on the main unit or the EQ button on the main remote control. OFF Audyssey Audyssey Byp. L/R Manual Audyssey Flat When "Audyssey" is selected, " " lights. When "Audyssey Byp. L/R" or "Audyssey Flat" is selected, or when the auto setup measuring results have changed, " " lights. • "Audyssey", "Audyssey Byp. L/R" and "Audyssey Flat" can be selected after the auto setup procedure has been performed. • If the settings of the speakers for which "None" has been determined at "Auto Setup" are changed, "Audyssey", "Audyssey Byp. L/R" and "Audyssey Flat" cannot be selected and measurements have to be taken again to include the newly-added speakers. • When using headphones, "Room EQ" is always set to "OFF". 40