Denon AVR 2808CI Owners Manual - English - Page 52

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting SOURCE SELECT CH SELECT QUICK SELECT uiop QUICK SELECT uio p CH SELECT Recording on an External Device (REC OUT mode) You can listen to one program source while recording a different program source. 1 Press . "ZONE2 SOURCE" is shown on the display. ZONE2 SOURCE ZONE2 TUNER ···· ZONE2 XM RECOUT XM ······ RECOUT TUNER RECOUT SOURCE 2 Turn until "RECOUT SOURCE" is displayed. The " " indicator lights. 3 Turn to choose the input source to be recorded. 4 Play the program source. For operating instructions, refer to the respective equipment's operating instructions. To record FM or AM broadcasts, select the broadcast (vpage 44). • To cancel, press , then turn until "ZONE2 SOURCE" is displayed. • Make a test recording before starting the actual recording. • Signals are only output to the analog REC OUT connectors when the digital signals input to the digital input connectors (OPTICAL/ COAXIAL) are PCM (2-channel) signals. • Digital audio signals input to the HDMI connectors are not output to the REC OUT connectors, so connect using the OPTICAL or COAXIAL connectors. • Sources selected with the REC OUT mode are output from ZONE2 as well. • In the REC OUT mode, the remote control unit's ZONE2 mode buttons cannot be operated. • The "XM" digital audio output signals are not output from the OPTICAL2 or OPTICAL3 output connectors. NOTE • Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder. • Input sources for which "Delete" is selected at "Source Delete"cannot be selected. 5 Start recording. For operating instructions, refer to the respective equipment's operating instructions. About the button names in these explanations < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit 49