Denon AVR 2808CI Owners Manual - English - Page 35

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Tuner Information This sets the time the on-screen display is displayed when an operation is performed. [Selectable items] Always : Show display continuously. 30sec : Show display for 30 seconds after operation. 10sec : Show display for 10 seconds after operation. OFF : Turn display off. iPod Information This sets the time the on-screen display is displayed when an operation is performed. [Selectable items] Always : Show display continuously. 30sec : Show display for 30 seconds after operation. 10sec : Show display for 10 seconds after operation. OFF : Turn display off. Display Mode Select the on-screen display's display mode. [Selectable items] Mode1 : If there is no video signal, flickering of the on-screen display is not prevented. Mode2 : P revents flickering of the on-screen display when there is no video signal. Use this mode if the on-screen display does not appear in the Mode 1, as may happen according to the TV being used. g Quick Select Name Change the Quick Select name. Up to 16 characters can be input. [Input characters] A ~ Z a ~ z 0 ~ 9 space) h Trigger Out Select the conditions to turn on the trigger out with respect to the zone, input source, surround mode. For details about the trigger out function, see page 19. Select "Trigger Out 1" or "Trigger Out 2" and make the settings below respectively. Selecting the Zone Select the zone for which the trigger out is set. Setting with Respect to the Input Source When the input source set to on is selected, the trigger out turns on. Setting with Respect to the Surround Mode • When the surround mode set to on is selected, the trigger out turns on. • Associated with respect to surround modes that are set to "ON". • This can be set if the "MAIN ZONE" is selected at "Selecting the Zone". • Associated when an input source for which "Setting with Respect to the Input Source" is set to "ON" is selected. [Selectable items] ON : Activate trigger on this mode. - - - : Do not activate trigger on this mode. j Remote ID Setup Set remote control ID. Match the ID setting of the remote control unit and the receiver. [Selectable items] 1 2 3 4 : Match the ID setting of the remote control and the receiver. When changing the remote ID, also change the AMP, iPod and TU modes of the main remote control unit at the same time (vpage 54). k 2Way Remote Make setting for 2-way remote control unit. [Selectable items] Used : U se 2-way remote control. Not Used : D o not use 2-way remote control. When using a 2-way remote control unit (RC-7000CI and RC-7001RCI, sold separately), set this to "Used". l Display Adjust display brightness of the receiver. [Selectable items] Bright : Normal display brightness. Dim : Reduced display brightness. Dark : Very low display brightness. OFF : Display is off unless controls are operated. Operating from the main unit Press the DIMMER button. Bright Dim OFF Dark 32