Denon AVR 2808CI Owners Manual - English - Page 54

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Remote Control Unit Operations Main Remote Control Unit • O n the main remote control unit, the display switches according to the device being operated and the mode. • In modes other than iPod, the mode switches between" " and " " each time the [MODE SELECTOR] is pressed. • In the AMP, TUNER and iPod modes, when the remote ID is set, the AVR-2808CI can be used independently even in an environment containing multiple DENON amplifiers. [ AMP] Signal transmission indicator [MODE SELECTOR] Operating DENON Audio Components 1 Press [MODE SELECTOR] for the component to be operated. The indicator for the component to be operated flashes. : AMP / ZONE2 / ZONE3 / ZONE4 / SYSTEM CALL : TUNER (FM/AM) / XM : NET/USB / DIGITAL TUNER : Satellite Receiver / Cable TV : iPod : DVD player (Recorder) / CD player (Recorder) : VCR / TAPE : TV b The NET/DTU ( and ) mode is not used on the AVR- 2808CI, so use the learn function to store the signals (vpage 54). b The mode switches each time [AMP] is pressed. GAMP modeH GZONE2 modeH GZONE3 modeH Presetting The included main remote control unit can be preset to operate devices of various brands. 1 Press [MODE SELECTOR] for the device you want to preset. 2 Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice. 3 Press [NUMBER] and input the 5-digit number of the brand of the component to be preset. The numbers are shown in the Preset Code Table (vEnd of this manual). When the code is registered, the signal transmission indicator flashes twice. When the preset code is transmitted, the mode indicator for the component to which that code belongs flashes. b The input mode is canceled if no button is operated for 10 seconds. Some brands have more than one preset code. If the component does not operate, try inputting a different code. [NUMBER] [RC SETUP] GSYSTEM CALL modeH GZONE4 modeH Operating Preset Components 1 Press [MODE SELECTOR] for the component to be operated. The mode indicator of the device to be operated flashes. 2 Operate the component. b For details, refer to the component's operating instructions. b The AVR-2808CI cannot be used in the ZONE4 mode. Depending on the model and year of manufacture of your equipment, some buttons may not operate. NOTE The device mode (" setting is being made. " or " ") cannot be changed while the 2 Operate the component. b For details, refer to the component's operating instructions. [HOME] is used to return to the AMP mode (AMP, ZONE2, ZONE3, ZONE4 or SYSTEM CALL) when in any mode other than AMP. 51